Originally posted by chpthril
View Post
Announcement
Collapse
No announcement yet.
Picking the right board.....
Collapse
X
-
You'll get your chance, smart guy.
-
Originally posted by NICKYPOO View PostNo, this not correct. There is no correct. It's what you prefer. That being said, probably 95% of people prefer to face the wake, or frontside. Oddballs such as my self prefer to ride facing away from the wake, backside. The whole goofy vs. regular side of the boat thing is irrelative. So when you speek of yourself and your particular stance, you are either regular frontside, regular backside, goofy frontside or goofy backside. I'll use myself as an example. I'm regular backside, which means I ride left foot forward on the starboard side. Hope this helps.
Comment
-
At 50 years old I have a hard time competing against some of the kids - I almost ALWAYS wind up in the same class with James!!!!!!! Inasmuch as I can't throw air's, I will start my run regular frontside and then on my first fall, I will ride switch or goofy backside on the same wake. The judges always give me points for freestyling. If there is a second pass, I like to ride backside regular on the starboard side...for improving your skills, riding switch or backside of your normal stance is one of the great challenges.Buy my kid's board! http://www.flyboywakesurf.com
Comment
-
Originally posted by Greg Mallek View PostI think you mean "Goofy"Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
I think I am going to try the 5'6 Broadcast from Hyperlite........... Any Boo Hiss'es about that?????????????? I like my buddies 4'8 board but it is a little unforgiving for beginners..............Last edited by lba_dillon; 02-01-2007, 12:12 PM.
Comment
-
Originally posted by NICKYPOO View PostI personally think it is the best of the "pop outs" for beginners. I think the thing that makes it so good for beginners is it's down the line speed. It makes it easy to stay with the wake.
Sounds like a plan to me.... that is alot of peoples *including mine* problem is staying WITH the wake/boat! So, I am excited to get the board and ride it in a few months! DAMN WINTER!
Comment
-
We really should be fair about the board. There are many things going for it. Easy to find, most pro shops have one in the showroom. Relatively speaking, they are cheap. If you have to order one, they are far cheaper than having a Poly U board shipped. It'll fit in a standard wakeboard rack. The construction methodology makes them fairly rough and tumble. There seems to be a goodly supply of used ones available, with plenty of life. If you live in Iowa and break a fin off, it's probably as easy as wanking one off an old wakeboard, or running down to Joe's Marine to get a replacement. No specialized 2mm allen wrenches to remove the fin. They tend to be more neutrally bouyant than an EPS or Poly U board which makes getting up easier for newbies. With the molded construction a crack in the glass won't wind up in destruction or water absorption to the core. A little epoxy smeared on the surface will seal it right up.
As Nick points out too, as much as we knock them, there are a bunch of things which make them a good choice for many folksBuy my kid's board! http://www.flyboywakesurf.com
Comment
-
Originally posted by Surfdad View PostWe really should be fair about the board. There are many things going for it. Easy to find, most pro shops have one in the showroom. Relatively speaking, they are cheap. If you have to order one, they are far cheaper than having a Poly U board shipped. It'll fit in a standard wakeboard rack. The construction methodology makes them fairly rough and tumble. There seems to be a goodly supply of used ones available, with plenty of life. If you live in Iowa and break a fin off, it's probably as easy as wanking one off an old wakeboard, or running down to Joe's Marine to get a replacement. No specialized 2mm allen wrenches to remove the fin. They tend to be more neutrally bouyant than an EPS or Poly U board which makes getting up easier for newbies. With the molded construction a crack in the glass won't wind up in destruction or water absorption to the core. A little epoxy smeared on the surface will seal it right up.
As Nick points out too, as much as we knock them, there are a bunch of things which make them a good choice for many folks
Yeah well all of that sounds good too me....... I figure it is better then going with a CWB which is what my marina sells. Plus one of the other guys I ride with already have the CWB so why buy the same thing????????? I just figured I'd give it a shot and it would be a good board for starters.....then if I seem to get into it alot then I can take it from there... Thanks for all the info guys!
Comment
Comment