Getting a better wave

[MvM]

After thinking I need to change out the AVX, I was pretty happy with today’s result. Very light crew, but moved 250 lead in the bow, surf side. Mission shaper, AXV at 3 and taps 4. 11.2
How does the wave look? https://youtu.be/AUiKwkWUPxo


Sent from my iPhone using Tapatalk

[Rbuss4]

Looks good. Did you check what TAPS 5 did to change the wave; allowing for more push/less leaning forward? I have found that 5 is almost always a better wave than 4 regardless of other variables. We use the NauticCurl, have Surf XL filled 100% surf side, 50-60% off side front and back with AVX around 7-10. This has been our best wave on the 2015 RZR.

[MvM]

I’ll try tonight. What speed are you running?


Sent from my iPhone using Tapatalk

[bsreid]

I’m still one to believe avx needs to run listed in order to make a good wave.

[Rbuss4]

MvM- we run 10.8 up to 11.2(smaller riders)

bsreid- we continue to experiment with listing vs not. We tried to hit 6 degrees of list with and without the NauticCurl, and the wave was pretty nice most of this summer. Tried the 100% surf side 50-60% off side(about 1-2 Degrees of list) with NauticCurl for shits and grins a couple weeks back, and found the wave to be larger with a bit more push and somewhat greater length. I do have upgraded bags for the back of my boat coming from Mike's. 825# per side compared to 600# SurfXL. Anxious to see if it makes a big diff in wave size. We will then again try listing and not with NauticCurl, and pure listing without the device.

[Rbuss4]

I’m still one to believe avx needs to run listed in order to make a good wave.

Hoping with additional weight; we can run AVX throughout its range instead of always having to run between 7-10