'15 Tige ASR wave setup help

[00Jason00]

Love love love this boat... But trying to surf has me frustrated.

I regular, port side surf, get a great wave and can surf it all day.

Wife is goofy, starboard side surf, washes, won't curl, no push...

Help! Any ideas?

2015 ASR
AVX plate removed and surf gates installed.

[JCP]

Surf gates?

[00Jason00]

Removed the original AVX plate and had dealer put individual plate. They lower opposite side your surfing on.

[bsreid]

Hull mod or just the surf tabs?

[00Jason00]

Just added the surf plates...

[chpthril]

Again, id ask is it Surf gate style that deploy perpendicular to hull or TAPS-3 style that deploys down below the hull? Although they aim to achieve that same thing, they do produce a wildly different wave. Someone's TAPS's ASR setup is not going to translate to your Gated setup.

[00Jason00]

Well like the taps system but the plates were added aftermarket. Just trying to get a feel for ballast settings. I just can't get a good wave right side

[JCP]

I may not be much help since I have zero experience with the ASR but most of the TAPS 3 boats are running much more weight on the offside than you are based on these settings from your previous post:


Left settings:
Port aft: 100%
Port forward: 100%
Star aft: 40%
Star forward: 0%
Trim tab = 4
Speed 11.1-11.5 depending on how high/long I want the wave.
Lake elevation: 5000 ft.
Yes I have elevation adjusted prop.
I've tried flipping the settings and have spent hours trying to dial it in without success.

I think that most TAP 3 set ups are 70-90% on the offside. You should also make sure that the left plate is deploying as far as the right since you have such a difference in waves from regular to goofy.

[bsreid]

If the asr is anything like the rzx you need to load up the bow that’s the one difference between the rzx and Z3 when running taps 3

[00Jason00]

The major difference is the actual hull shape. The ASR is angled, the RZX and the other newer ones has a very square hull.