Announcement

Collapse
No announcement yet.

What should rpms run while surfing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What should rpms run while surfing

    I bent my prop and just replaced it with the acme 2419 on a z3. I was wondering where my rpms should be hanging around , both cruising and surfing
    If you wanna know what I did , come with me next time...

    #2
    Need to know what your drivetrain specs are, how much ballast your run while surfing, your lakes elevation, how many people in the boat.

    Comment


      #3
      Only one ratio in a Z3, aside from the 575 should all be roughy the same at surf speed given the motors are building roughly the same torque at that speed. Heavily ballasted you should be 3500-3900 at surf speed. Cruise speed will vary, at 27-28 you should be in the 4s if my mind serves me right.
      Germaine Marine
      "A proud dealer of Tige, Supra, Moomba and ATX performance boats"

      Comment


        #4
        Rzx with that prop and tranny I’m right at 4000 or just under for surfing,

        Comment


          #5
          at 1000' amsl, 2419 prop, '18 R23, raptor 400, full rear ballast bags, 900# lead in rear (even), and 60/40 in front bags, 3 ppl ~500#, goofy wave, 11.4, taps 4/4 i think, and we were running right around 3200rpm

          Sent from my SM-G955U using Tapatalk

          Comment


            #6
            Originally posted by cnote View Post
            at 1000' amsl, 2419 prop, '18 R23, raptor 400, full rear ballast bags, 900# lead in rear (even), and 60/40 in front bags, 3 ppl ~500#, goofy wave, 11.4, taps 4/4 i think, and we were running right around 3200rpm

            Sent from my SM-G955U using Tapatalk
            and cruising (~28), no ballast, same ppl, right around 4100-4200. but i wasn't paying as close attention but will this weekend and report back. I'm really impressed with the setup on this boatfor surf efficiency, for me one of the selling points. I think we used just over 15 gal of 90 octane for about 2-3 hours of surfing with a little cruise mixed in.

            Sent from my SM-G955U using Tapatalk

            Comment


              #7
              Thank you guys as always, I will keep a much closer tab on it over the next few weeks and report in.
              If you wanna know what I did , come with me next time...

              Comment


                #8
                @Langwell: updated numbers from this weekend w/ the 2419 on my '18 R23, raptor 400. Surfing was ~3100rpm with 700# people, 500# lead all in back, rear bags full, forward bags 50/50. 11mph, 4/3 surf/taps. Cruising ~4000 RPM 28mph, no water ballast, 700# ppl and 500# lead in the back. WOT 39mph @ 5400rpm (just me in the boat, with the lead). Hope that helps.

                Comment


                  #9
                  Lower the better for wash and a clean wave. I think I turn 2100 at 12.75-13.25 mph and heavily ballasted.
                  Build thread: http://www.tigeowners.com/forum/showthread.php?14787-Duffy-s-2005-24v-wakesurfing-mod-thread&highlight=duffys+24v

                  Comment

                  Working...
                  X