thanks guys, gonna play around with the port side a little more and see what happens, saw in another thread one guy used no bow weight, so maybe try that. and yeah a pretty proud dad moment.
Announcement
Collapse
No announcement yet.
Aftermarket Surf Gate
Collapse
X
-
Made one for a buddy that has a 13' MB that could not get any kind of wave listed. It worked really well compared to what he had.. even with a lot of wind and his lack of knowledge for diving a boat haha
Before:
IMG_5746.JPG
With Suck gate:
IMG_5691.JPG
IMG_5727.JPG
Comment
-
Originally posted by jtryonHe must have REALLY not known what he was doing to have that bad of a before wave. Looks good after though. What model MB?
Sent from my iPhone using TapatalkMikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
He really didn't know at all and we tired to help him, we filled factory 100% and he has a bad that fills the whole storage compartment on each side, not sure what the size was exactly but it looks close to the 1K we have in our boat, with one filled on the surf side it was just washed out, speed didn't help either. We tried from 10.2 all the way to 15 just to see in .2 increments and it didn't change much, then filled factory and each bag half and this was the result with the sharper. He really needs a bag up front and I think that would help his listed wake, we have 5 total in the boat and with 4 of us up front maybe 500LBS it was a little better with the gate but did't clean anything up listed. He has a F24.
Comment
-
Here is my final product. It works great. I am running a 500 lb (they may be 650 lb bag) bag in each of my rear lockers and a 400 lb bag in my walkway up front in my 2004 20V. The wake face is not the cleanest, but man there is a LOT of push on this wave. To be clear the surf gate is not creating the larger wake, it is the extra weight. What the gate allows me to do is put more weight evenly on my boat and not feel like I'm tipping the boat over, and the quick changeover from side to side is AWESOME!
IMG_6820.jpgIMG_6821.jpgIMG_6822.jpg
Comment
-
Last night I got to take my "suck gate" on its inaugural voyage on my 22Ve - it was AWESOME! Both sides of the wake were taller, longer and had more push vs. my standard listed wake with MLA customs. I'd been following the "suck gate" thread on Mastercraft Team Talk for a while, and ended up knocking off user Bet_On_Black's design (post #686 shown here):
https://www.mastercraft.com/teamtalk...=70442&page=69
Apparently those aluminum handles people keep using with cutting boards and bookshelf brackets have springs that will eventually rust - so I used this handle which has stainless steel springs:
http://www.westmarine.com/buy/seatea...ndle--12040234
I built the other parts from 1/2" thick HDPE starboard from Amazon.com here:
https://www.amazon.com/Seaboard-Dens...%22+thick+HDPE
I don't have a picture of my gate, but it basically looks like Bet_On_Blacks, with crappier craftsmanship...
My set up was as follows: surf side full, non-surf side 400-700 lbs (we messed around so much, not sure what is ideal), 300 lbs. in the bow, and 3 passengers (2 sitting surf side). Speed 11.6 - 11.8, TAPS 6-7. I placed the gate below the "step" in the hull - basically as far back and as low as possible. I didn't have any issues with spray coming in the locker - it stayed behind the boat.
RPM's were up only slightly. Normally surfs around 2800 - with the gate it was more like 3000-3100.
IMG_7060.jpgIMG_7061.jpg
Comment
-
Oh I totally agree - most of the stuff on MC forums are guys simply making surfable waves on boats that were barely capable of surfing without a gate (old x-stars, direct drives, etc.)
I loved my 22Ve wave even before I did this - but I wanted to provide another data point that showed it can significantly better with the gate.
Comment
-
Mission Delta
Originally posted by jbgp1200 View Postrhoadsdj I did the same and placed mine below the step. The wave inst as good IMO as above the step but I did solve the water in the locker problem.
Comment
Comment