Okay, I have 2002 23v. This winter I installed a 2nd battery in the compartment where the taps pump is located. I moved the pump to a different location in the compartment. After I checked to make sure the taps was working, and it was. Take it out for the first time this year, and it's not working. A matter of 1 month and it's not working.
Here is the technical I've done thus far. Checked the fluid, and it was low, so I added some. Still nothing from the pump, when I hit the switch. Checked the breaker, not popped. From what I've read, I should check for an inline fuse somewhere. Can't find it though. Location?
Here is the weird part, when I hit the switch, the neutral light gets brighter and the gas gauge shoots to full. Nothing from the gauge or the pump. And when I'm under the helm, I hear the click which I assume is the relay. I've also tried to manually assist the plate itself while someone hit the switch, which is pretty much pointless because the pump isn't running.
Please help, sucks being stuck at 1 when you've got a bunch of weight in the boat.
Here is the technical I've done thus far. Checked the fluid, and it was low, so I added some. Still nothing from the pump, when I hit the switch. Checked the breaker, not popped. From what I've read, I should check for an inline fuse somewhere. Can't find it though. Location?
Here is the weird part, when I hit the switch, the neutral light gets brighter and the gas gauge shoots to full. Nothing from the gauge or the pump. And when I'm under the helm, I hear the click which I assume is the relay. I've also tried to manually assist the plate itself while someone hit the switch, which is pretty much pointless because the pump isn't running.
Please help, sucks being stuck at 1 when you've got a bunch of weight in the boat.
Comment