Marine Power Impeller

[Matt Garcia]

Does anyone know what kind of impeller that Marine Power engines use? Is it the same as what Mercruisers use? I have the Marine Power HT 360HP engine.

Also does anyone have an idea on where the impeller housing is located? I am taking my boat on a small vacation and wanted to be prepared in case anything happens.

Thanks

[lee]

It does not use a Merc impeller but a MAYFAIR/JOHNSON Impeller part number 09812B.

[THE g]

It does not use a Merc impeller but a MAYFAIR/JOHNSON Impeller part number 09812B.

Does the 6.0 L 400HP also use this impeller I wan't to do the same thing.

[Matt Garcia]

It does not use a Merc impeller but a MAYFAIR/JOHNSON Impeller part number 09812B.

Thanks lee. Where is the impeller pump housing located?

[lee]

Inside the little housing. The cover can be removed with a straight blade screw driver.

[gman]

lee, is this the same impeller part for a 340hp 5.7l enigine (2005)

[da.bell]

lee, is this the same impeller part for a 340hp 5.7l enigine (2005)

How about the '06 also?

[Matt Garcia]

Thanks a lot lee.

[lee]

lee, is this the same impeller part for a 340hp 5.7l enigine (2005)

Yes it is.

[THE g]

Does the 6.0 L 400HP also use this impeller I wan't to do the same thing.

Lee is this the same?

[lee]

Yes.

[Matt Garcia]

Lee, which is the right one or are they both the same?

https://www.overtons.com/modperl/pro...=29530&aID=10I

http://www.boatersdiscount.com/prodd...rod=189-09812B

[lee]

The one from Overton's is right for sure and the other one I do not know.

[TigeDuner]

Thanks a lot lee.

Matt, did you replace your impeller? How was it? According to Lee's post, you can remove the impeller cover with a screw driver and not have to remove any belts or hoses. Please let me know. Thanks, TD

[tarheeler]

According to Lee's post, you can remove the impeller cover with a screw driver and not have to remove any belts or hoses. Please let me know. Thanks, TD

that is correct