Announcement

Collapse
No announcement yet.

2006 20V startup Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    2006 20V startup Help

    I have a 2006 20V. My helm lights come on, Gauges all come on but my battery voltage meter doesn’t kick on. All batteries are brand new. Any ideas? It clicks when I turn it over but otherwise nothing. Should I be looking at a new alternator or starter? It ran perfect when we put it up for winter and was stored all winter in a heated garage. So hard to think something significant happened.

    Any help Or direction would be huge! Hoping to get it running before Memorial Day weekend.

    #2
    Are the batteries new this season and never used? If so, you might have a connection wrong or missing. If they were installed last season and sat all winter without being charged, they might be low.
    Last edited by JCP; 05-15-2018, 05:39 PM.

    Comment


      #3
      My first thought is a connection issue on your boat. The 10v on the gauge does concern me. Can you check it with a volt meter at the gauge to see what you are getting?

      Can you jumper the starter manually? – If you don’t know how to do this, don’t attempt.

      My second thought is that the boat has a bad starter. Maybe the solenoid is throwing out like it should but the starter isn’t spinning.
      Oh Yeah!

      Comment


        #4
        Got the voltage gauge to fire up normally, however still no luck when I try to turn it over. All gauges are normal, fuel
        Pump primes and I have power to my starter. But the engine doesn’t even attempt To crank over.

        Do you have a part number and a link to a starter install for the MP 5.7 310HP motor?

        Thanks!

        Comment

        Working...
        X