Check Gauges Lamp On and Buzzer PCM ex343 Catanium
Hi, I own a 2013 Tigé Z1 with the PCM ex 343 With the Catanium Clean Emission system.
This weekend, after a full day of normal use. After ignition and while passing roughly 1500 rpm, the check gauges lamp turn On and a buzzer sound that last for about 5 second.
After checking, all gauges of the engine showed normal signs, (oil level, oil pressure, temperature, voltage, power, etc. ) There are no signs of issue what so ever. The gauge (red triangle ) stays always on and every time when accelerate and pass the 1500 rpm mark , the buzzer make a noize again, for the same 5 seconds.
Our first hypothesis is that while putting the boat in reverse in a shallow water mudding section, some dirt could have entered the filter or the Clean emission system.
Before taking the boat out of the water to be check by mechanic, I wanted to know if someone ever had a similar issue, or have any idea on what it could be.
Thanks in advance,
This weekend, after a full day of normal use. After ignition and while passing roughly 1500 rpm, the check gauges lamp turn On and a buzzer sound that last for about 5 second.
After checking, all gauges of the engine showed normal signs, (oil level, oil pressure, temperature, voltage, power, etc. ) There are no signs of issue what so ever. The gauge (red triangle ) stays always on and every time when accelerate and pass the 1500 rpm mark , the buzzer make a noize again, for the same 5 seconds.
Our first hypothesis is that while putting the boat in reverse in a shallow water mudding section, some dirt could have entered the filter or the Clean emission system.
Before taking the boat out of the water to be check by mechanic, I wanted to know if someone ever had a similar issue, or have any idea on what it could be.
Thanks in advance,