Announcement

Collapse
No announcement yet.

Engine code help please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Engine code help please!

    If anyone can help it would be appreciated. I keep getting a service engine warning on my 2009 rz4 with pcm ex 343. Seems to always pop up when I am just above 3000 rpms (i really dont go much faster than that for the most part) it hasnt happened at all when idling. I took to tige dealer (both within 200 miles of me have only been dealers for a couple years) and he put on computer. He said i was getting spn: 520197 FMI: 4 Voltage below normal or shorted low.

    Other issues i have had was a busted serpentine belt, but everything seemed to move freely, and still getting warning after replacing. I have had the info screen stop receiving data (all titles are there with no numbers at all in the fields) and depth sounder is intermittenly not working ( read 949 ft in 30 ft of water, and read 3 ft in 400 ft of water)

    Boat seems to be running great, no noises, starts easily, etc. Not sure if it is a wiring issue, battery issue (reads 13.6 volts while running, 12.3 battery voltage and 12.0 ignition voltage) or an alternator issue.

    Again any help is appreciated as the dealer really didnt seem to know.

    Sent from my SM-G935V using Tapatalk

    #2
    That code is for knock senor #2. Did your dealer replace that sensor?

    Comment


      #3
      No, just printed out the report

      Sent from my SM-G935V using Tapatalk

      Comment


        #4
        Can anyone on here sell me the sensor?

        Sent from my SM-G935V using Tapatalk

        Comment


          #5
          Or is this something i can get at napa? And can I fix it myself?

          Sent from my SM-G935V using Tapatalk

          Comment


            #6
            Originally posted by JCP View Post
            That code is for knock senor #2. Did your dealer replace that sensor?
            Is that one port or starboard side

            Sent from my SM-G935V using Tapatalk

            Comment


              #7
              Starboard


              Sent from my iPhone using Tapatalk

              Comment


                #8
                Originally posted by JCP View Post
                Starboard


                Sent from my iPhone using Tapatalk
                Of coarse it is the side harder to get at.

                Sent from my SM-G935V using Tapatalk

                Comment


                  #9
                  Originally posted by trevor View Post
                  Of coarse it is the side harder to get at.

                  Sent from my SM-G935V using Tapatalk
                  8 year old boat. You might consider doing both if they aren't too expensive.


                  Sent from my iPhone using Tapatalk

                  Comment


                    #10
                    Originally posted by JCP View Post
                    8 year old boat. You might consider doing both if they aren't too expensive.


                    Sent from my iPhone using Tapatalk
                    Will do. It looks like autozone has the same exact knock sensor (appearance and supposedly for a 5.7 chevy 350 block) under a different part number for $30 a piece vs a nautique dealer online for 70 plus shipping. Do you know if these are different through pcm or if any gm 5.7 350 block sensor will work? It is only a hundred bucks different bit why waste money if they are the same thing with the price doubled since they wrote marine on it.

                    Sent from my SM-G935V using Tapatalk

                    Comment


                      #11
                      http://m.autozone.com/engine-managem.../45338_54324_0

                      Vs.

                      http://www.skidim.com/mobile/KNOCK-S...tinfo/R020027/


                      Sent from my SM-G935V using Tapatalk

                      Comment


                        #12
                        I was thinking that you had a Ford engine, if it is a GM bank 2 is port side.


                        Sent from my iPhone using Tapatalk

                        Comment


                          #13
                          Those auto zone sensors are the same as the overpriced ones, all GM compatible.
                          Fixing everyone elses boat just so I can use mine...

                          Comment


                            #14
                            Thanks everyone!

                            Sent from my SM-G935V using Tapatalk

                            Comment

                            Working...
                            X