Announcement

Collapse
No announcement yet.

Taps actuator repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    After tracing all the wires the negative/ground wire from the taps module appeared to possibly have a worn coupler combined with being daisy chained to another gauge. I disconnected the wire from the ground altogether and the symptoms were the same as it not working intermittently (taps gauge flips from 7 to 1 and taps doesn’t respond), so I may have replicated my intermittent issue... knock on wood. I also read in other threads that taps module likes a “clean ground” given that, I chose to route the negative wire directly to the negative dashboard bus.

    all appears to work currently, I’ll update again if the issue returns.


    Sent from my iPhone using Tapatalk

    Comment

    Working...
    X