Announcement

Collapse
No announcement yet.

Marine Power Impellar change

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Marine Power Impellar change

    Does anyony know if the impellar on a 2008 RZ2 340hp spins in a clockwise or counterclockwise direction if you were looking at the impellar from the rear of the boat, that is if you could actually get there as it is seems entirely impossible to get in to this position. Thanks in advance for any help you may have to offer.

    #2
    I changed Coaches impeller in this RZ2 on the water and I believe it spins clockwise.

    BTW if you have to change an impeller with the boat in the water...good luck.
    Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. THAT'S relativity. Albert Einstein

    Comment


      #3
      Originally posted by G-MONEY View Post
      I changed Coaches impeller in this RZ2 on the water and I believe it spins clockwise.

      BTW if you have to change an impeller with the boat in the water...good luck.
      Or be shorter than 6'8"
      Let it be!!!

      Comment


        #4
        Originally posted by G-MONEY View Post
        I changed Coaches impeller in this RZ2 on the water and I believe it spins clockwise.

        BTW if you have to change an impeller with the boat in the water...good luck.
        correct, clockwise is the way the impeller turns.

        Comment


          #5
          Originally posted by xpjim1 View Post
          Or be shorter than 6'8"
          That was not the problem, it was the fact that water was pouring into the bilge once we opened it up.
          Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. THAT'S relativity. Albert Einstein

          Comment


            #6
            Originally posted by G-MONEY View Post
            That was not the problem, it was the fact that water was pouring into the bilge once we opened it up.
            One thing: Plastic bag on intake. Just remember to remove the bag before you start the engine

            Comment

            Working...
            X