Good day all, I have a question that I hope someone can help, the mercuriser agent in bahran does not carry stocks of spares for my engine, does any one have alternative part numers for belts from other belt manuafctueres?
-
another sunny day in the Magic Kingdom -
Take the number off of your belt and contact the different belt manufactures on the innernet and see if they have a crossover number, also with your brand of belt you should be able to get the demensions such as lenght and width and compare. Hope that helps. -
Do you have belt stores? You can take the belt over to them and they can get you a replacment.http://www.wakeboatworld.com
[]) [] []V[] [])Comment
-
Does your engine use a single serpentine belt?Originally posted by Richard_Bahrain View Post
If it's a single serpentine and similar to our Mercruiser 5.7 Mag MPI it will use a K6 type serpentine - K series (.14" between grooves), 6 groove. Use a ruler to measure how long it is in circumference. Ours is 88" which will result in a number from some manufacturers of 880K6. If it was 87.5", it would be 875K6. You can use that number to cross it over to other manufacturers.Comment
Comment