Raptor 440 drain plugs

[cramer]

Some models will not clear the floor/liner so they use the two brass plugs.

Appears to be room for it on my '19 R22 with the 360, I'm going to add it.

[UNSTUCK]

So I was draining water tonight out of the engine and noticed ever couple of minutes my bilge pump would turn on for maybe two seconds then shut off. Didn’t seem to be any reason why. Anyone have this issue?

[jslayde1]

The pump is designed to operate that way - every couple minutes its come on to "sense" if water is in the bilge. Instead of using a float...

I believe it has a couple settings, but I'm not sure if you can turn that off since that is what makes it 'automatic'.

[UNSTUCK]

I know mine has a sensor on the side of it where if I put my finger over for a bit the pump will kick on. I thought that's what it was set to do.

[tigemech]

There are some 400s in r series that have the cross over and the plug is located underneath the vdrive

[moosebump]

Odd, I’m pretty sure my ‘17 Z1 has the manifold cross over hose. It runs right in front of the transmission drain plug.


Sent from my iPhone using Tapatalk