Raptor 6.2 winterization

[scoot18]

2016 Z1 w/ 6.2 Raptor engine; in need of help finding the 5th point to drain water. There are these little convenient stickers placed around the engine to indicate a point to drain water for winterization. They are marked 1 of 5, 2 of 5 etc. I can't find 5 of 5 anyone have any ideas where this may be? The Indmar manual isn't very clear on the locations. It says nothing of the little blue stickers in the manual and I've found all of the ones Indmar has illustrated in the manual.

IMG_20161112_160642_593.jpg

[EngineNut]

The manual was written before they decided to put the little stickers on the engine. Actually if you follow the diagram on page 8-5 in the manual you will be just fine. 1 0f 5 is the water crossover hose that connects the exhaust manifolds ... item C in the diagram. 2 of 5 refers to the anode/drain in the v-drive as pointed out on Fig 8.5 on page 8-7. 3 of 5 is the anode on the heat exchanger ... Item B on page 8-5. 4 of 5 is the water tube between the raw water pump and transmission cooler ... Item A on page 8-5. 5 of 5 refers to the Raw Water Pump cover which is not pointed out on page 8-5. This would be a good time to replace the Raw Water Pump Impeller.

If you drain the water at these points you will be in good shape. Sorry if there was any confusion.

Larry Engelbert
Indmar Marine Engines

[D&P Powell]

Larry Engelbert, Indmar Marine Engines

Great to see a representative from Indmar on here answering questions!