I bought my boat used, and of course it didn't come with any manuals. Anybody got a lead for the ZF 41 IV? I can't seem to find anything, cant even find zf 41 on their website.
Announcement
Collapse
No announcement yet.
zf Hurth 41 tranny Manual? on 2014 RZR
Collapse
X
-
2014 would be a PCM motor here is the manual from PCM http://www.pcmengines.com/media/imag...L510010-14.pdf what type of information are you looking for?
-
Originally posted by rensink View Post2014 would be a PCM motor here is the manual from PCM http://www.pcmengines.com/media/imag...L510010-14.pdf what type of information are you looking for?
Comment
-
Here's the word from ZF: "Good news you don’t have the only ZF 41 IV. It is actually produced for Indmar and it is our IRM 40 paired with our V-drive unit. I’m currently checking on a manual for both the main gear and the V-drive unit from the factory. Once I have more information I will let you know."
Blake called me from the company about an hour after I emailed from their website- very fast response. I was mainly looking for the ATF fluid capacities, but just pumped out as much as I could into a clear container and marked it, then replaced with equal amount. Also curious to know if there are filters accessible.
Comment
-
The shifting portion of the V-drive holds just over 2 quarts of ATF and the V-drive portion holds approximately 1 quart. The shifting portion of the V-drive has a debris screen that is accessible from the bottom of the transmission. It is very difficult to get at and most people never disturb it. There is no filter on the V-drive itself. The fluid capacity information is in the Engine Operator's Manual.
Larry Engelbert
Indmar Marine Engines
Originally posted by Surf75 View PostHere's the word from ZF: "Good news you don’t have the only ZF 41 IV. It is actually produced for Indmar and it is our IRM 40 paired with our V-drive unit. I’m currently checking on a manual for both the main gear and the V-drive unit from the factory. Once I have more information I will let you know."
Blake called me from the company about an hour after I emailed from their website- very fast response. I was mainly looking for the ATF fluid capacities, but just pumped out as much as I could into a clear container and marked it, then replaced with equal amount. Also curious to know if there are filters accessible.
Comment
Comment