Adding led underwater lights 2016 R20

[outkastmunkey]

So the dealership said this was pre-wired curious if anyone has added them and were they wired to the stern or just down to the circuit panel.


Sent from my iPad using Tapatalk

[chpthril]

Based on past model years, the wires will be tagged and bundled somewhere along the transom. The B+ could be blue or at least a blue strip.

[outkastmunkey]

Based on past model years, the wires will be tagged and bundled somewhere along the transom. The B+ could be blue or at least a blue strip.

Thanks I will look harder.


Sent from my iPad using Tapatalk

[bsreid]

On your 2014 we couldn't find any so we just ran our own, seemed easier.

[Mike88]

Yeah they are pre-wired. In my 2016 RZR they was. I've done mine last October. All wire was tapped in a bundle in the transom. Just where I was supposed to put the left light. I had to remove a panel or 2 to see it and it's not big but they should be there somewhere!
I had the chance to look the oem's they put on my boat at the dealer when I was test driving some models to purshace. Mine had not the option but the Z1 had them, I don't know what's the brand they put but it was two simple row of white LED each side and I found it was not enough..
Si i purshace a pair of lifeform 6 LED. Men this thing is an all other level haha. I can't imagine the titan ones (9 leds) but it was too much money for simple underwater lights haha and I'm very satisfied with these ones .
Hope you find yours!

[KoolAid]

It should be a blue with black stripe wire with a ground. It will be on the ballast empty portion of the harness at the transom so it will be down low. If it's a 2016 it will have a label on it.