Where is my blower at? It's not working

[Waterski-Rebel]

Well, I've been pulling wire for my semi-automated ballast install, and just tested all of my switches. My blower won't turn on. I am wondering if I pulled a cable loose by accident. I tried to find it (in the back of my boat), and don't see any inlet grills. Where is my blower located?

thanks!

[jsz]

Look for the 3" flex tubing probably mounted on the rear wall of the boat. That should lead to the blower.

[Waterski-Rebel]

thanks, I found it. I expected it to be on the side of the boat, not in the middle.

I tried to turn it by hand, and it wouldn't turn at first. I then checked the wireing at the switch with a meter, and it was good. I left the switch turned on (I should have turned it off), disconnected the wire, and reconnected it, and it started to work as soon as I had contact. I don't understand what was wrong, but it's working now.