If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You might want the 857 which is 13.25 x 15.5 with .060 cup instead of .105 cup.
Thanks.. I'll look into that but don't spend my time at altitude when boating. I am <500 feet from sea level 99% of my time... But definitely will look at purchasing something for that 1% in the future.
How long does it take to plane, in terms of seconds and where is the RPM at and throttle position?
You should be able to give it half throttle, be around 3200 - 3500 RPMs, and it should take about 3 to 4 seconds to plane. If you are giving it more throttle and not reaching those RPMs it may be an engine problem.
Like everyone else said, you should have the ACME 537.
Thanks for all the help, repaced the low and high pressure pumps just today we will see. A friend has a RZ4 16 prop and 400 hp and he has had no problems we will see tonight.
Comment