fake-a-lake

[fleetpaint]

looking for a fake a lake w/a hook to hold the unit to the bottom of the boat. no pole!

[eks]

Where do you find them and how much are the?

[fleetpaint]

thats my question.

[eks]

the only thing I found close to that is for a I/O. Perhaps someone cut the wire and made a hook. (Click here for more Info)

[Timmy!]

I used a plunger and some garden hose fittings to make mine, cost like $6 total....

[turbonine]

$4 Home Depot plunger and a 2x4 as a shim work perfect for me.

[Guest]

I don't need one on my 07 20V. I hoke a standard garden hose to a fitting in the engine compartment, push a lever, turn the hose on and I am ready to go.
I have no idea what option gave me this but it is nice. It might have been the Flush kit(Weed Strainer)option which was on the stock model I bought.

[CP3]

I did the same as most ppl here. made a hole in the plunger cut the pole to the right length and wedge it up under the lake

[time2kyl]

I was lazy, I cut a 3/4" hole for the hose in a clear GLAD container and stuck a 2x4 under it.

[Costigan]

I could only find the one with the pole. Maybe watch e-bay.

[fleetpaint]

the problem w/ the plunger type is it will tend to move off the water pick-up when you get in & out of the boat.

[KonaKing]

I plumbed a hose connector in the raw water side works great also great for winterizing. since my PCM ZR6 is a closed system I just blow the water out and add antifreeze

[Jason B]

I plumbed a hose connector in the raw water side works great also great for winterizing. since my PCM ZR6 is a closed system I just blow the water out and add antifreeze

Pics!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[KonaKing]

I'll get some up today

[Razzman]

I bought bought the Moeller unit off of Amazon.com for $25 shipped. Looks just like the fake lake, works perfect and doesn't move. For $25 it was worth it not hasseling making my own.