Anybody ever install pull-up cleats on their boat?

[chpthril]

I installed 2 (one on each side of the bow) last summer and it was a piece of cake. I took pics, but cant remember if I did a thread

OK, I finally found the pics I took

I needed 2 up front


Taped off the area and marked where to cut/drill. I used the rubrail, mid-cleats, tip of bow, and handrail as reference points to get both cleats in the correct place.


Removed the 2 bow speakers to give me access to the center bow cushion back mounting studs. Removed seat back




Make sure you have room to drill and work on the backside


Drill and cut as needed for your cleat. Double check whole saw size first. Bevel edge of hole to help prevent cracking.


Test fit


Add a bead of 3M 5200, install cleat, tighten, clean excess sealer/adhesive. Reinstall seat back and speakers.

[jleger98]

jleger98 -
Got any pictures of the front cleats?

no, but as soon as it stops snowing I'll see about getting some