Have the dealer swap out the rudder. They can call me and we can test a few things to validate its the rudder. Should be single hand smooth at almost all times.
-
Oh Yeah! -
The rudder has a zert fitting and I greased it. Very slight difference in the tightness, but still very tight.
I’m assuming it is probably the steering cable? The boats a 2017 with only 100 hours. Is this normal?Comment
-
Sorry for this, I hate to be THAT guy but I believe the name is Zerk fitting.
Zert makes my head lean sideways.
Again, I appologize.Comment
-
What happens when you disconnect the cable at the rudder and turn the wheel? Does it feel the same? If so you have a cable or wheel issue. If it’s much easier you have a rudder issue. Should be a real easy test.Comment
-
I was having the same issue when I was at the 100 hour mark and I ended up replacing the steering cable and can know steer my boat with 2 fingers again.Comment
-
My $.02 says replace the steering cable. My 05 was a two hand turn at first. Thought it was supposed to be that way as I had never driven a wakeboat before. Drove a friends Malibu and thought he had power steering
. Came to the forums and found out about the steering cable. So much easier now. Have you watched the rudder while someone else turned the wheel?
Comment
-
What is the Small stainless steel cable that is attached to the rudder linkage?Comment
-
Sometimes a bad tilt mechanism can make the steering hard.Comment
Comment