subwoofer project complete PICS

[rushin]

The panel is non removable. I used a Rotozip to cut mine.

[NICKYPOO]

Do they still make the Rotozips. Them things are handy little buggers.

BTW- Congrats on the Old Timers status. That's two Nor Nevs in the Senior ranks. Battle Born Baby!

[rushin]

I don't now if they still make them or not, I have had mine for a few years now. I did see a Dewalt version this weekend.


Thanks.

Is that RZ2 unwrapped yet in town?

[jsz]

I started the hole with a drill bit and then used a jig saw very carefully. I think it gave a smoother line than a roto zip would have. The wood is about 3/4 to 1" thick.

[Tequilasun]

If you get cut on the push stroke Jig saw blades, you will have a cleaner cut than conventional ones.

They are kind of hard to find, and a more expensive as well.

[dougofkc]

Does your horn buzz?

Nice dual subs! how did you deal with your horn? I have a 800W 12 installed in same spot and my horn sounds like a blown speaker when the bass hits. I also noticed your jumper box. How many batteries do you run? Did you use a cap? I've heard mixed reviews on their necessity.

[jsz]

Thank you. I've never had an issue with the horn. I have 2 batterries with a simple on/off switch. I'm not sure what you mean about using a cap?

[lee]

We use a 1 farad cap on all of our sub installs.

[dougofkc]

horn buzz

my Tige boat horn is in the same airspace as the sub under the steering wheel. When the bass hits it vibrates the horn... Guess its not a prob or you would have know what I was talking about.