1994 2002 fslm upholstery help

[Prostock]

Bought boat new and was getting long in the tooth. Couple years ago I went out on a limb to get new carpeting and the upholstery redone. Found a guy that we THOUGHT was good in our little town. I could not figure out how to get the bow out, so I just cut it out. The wood had rotted and I rebuilt the bow and gave it to the guy to reupholster. Long story short, he got some of the parts done, which I have, but eventually got in trouble with other guys (because of money, drugs, and who knows what else). He lost all of my stuff; Painfully the bow section that I had rebuilt was among them. I have let my boat sit for years because I don't want to go through the rebuild process AGAIN, its discouraging and I have no pattern to use. My youngest daughter has been pestering me on getting it back together. She even went as far as creating a account on this site and showing (forcing) me.

Are there shops that would rebuild all this in the central TX area?

[TeamAllen]

Welcome to the site. Good work on your daughter's persuasion. It's good to see an original owner of one of the early boats.
Sounds like you have a challenge on your hands. I'm really not sure what parts you need. Can you post a picture of what you have and need?
Your daughter can probably help get a picture posted. There are probably a few others that might be able to get a template or measurements that could help?

Maybe this thread will be of help?
http://www.tigeowners.com/forum/show...highlight=fslm

[Prostock]

20170803_103722_1501774746735.jpg 20170803_103639_1501774729229.jpg 20170803_103725_1501774746968.jpg 20170803_103651_1501774729481.jpg 20170803_103709_1501774746227.jpg 20170803_103616_1501774728549.jpg

Hopefully those attachments work, let me know if they don't. Like I mentioned its pretty rough, cats have been climbing on it too.

[TeamAllen]

Attachments aren't working

[KoolAid]

Prostock, check your PM.

[JaredW-00]

I just took mine apart and I have the old wood of you want to use it.

[JaredW-00]

I know of one piece may have made it in the trash. It was small I think part of where the armrest is. But yes To get the front out it has to be cut. I made speakers in the front so I could stick my arm in the hole and screw into the counter sink nuts I used.