Announcement

Collapse
No announcement yet.

Fuel question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fuel question

    I just replaced the impeller, engine oil, and fuel filter/water separator. The boat ran fine to warm it up, but it was hard to start. After the change, i cannot get the motor to start. It just cranks and cranks. I pulled the new fuel filter/water separator and there is no fuel in there. Im assuming this means no fuel is getting pumped in. Any suggestions?

    #2
    Welcome to the site! What kind of boat and engine are you working with?
    It does take a little time to prime the new fuel filter after changing it.
    Mike Allen, Tigé owner since 1997

    Comment

    Working...
    X