Announcement

Collapse
No announcement yet.

PAR-MAX 2+ – 2.8 GPM (10.6 LPM).

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    PAR-MAX 2+ – 2.8 GPM (10.6 LPM).

    Hello, I had a question as to what this pump is for in the back right corner behind the battery box on left side of boat. it has a hose running into the pump and a hose running out of the pump.
    I have a 08 tige 20i (like to barefoot, slalom and surf.) I have ballast in back and two tanks up front.
    I have enclosed a bad pic. Any one know what this pump would be for? I have shower and heater but does not connect to these items.
    It does not look anything like my intake pumps for ballast. I have attached a bad pic.
    pump.jpg
    Tags: None
    #2
    Follow the hoses.

    Comment

      #3
      what type of hose is connected to it? Clear, Black, Steel Re-enforced?
      My life's journey is not ending up looking pretty, its sliding in broadside, used up, worn out, screaming "What a Ride"

      Comment

        #4
        Looks like a shower pump.

        Comment

          #5
          Shower for sure. Head houses a pressure sensor. when the nozzle is squeezed, the sensor senses and the pump comes on.
          Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

          Comment

            #6
            Black Hoses conected to the pump. I in and I out
            Yes probably shower pump.
            I took out batteries so will confirm in Spring once I put back in and turn shower on.
            Thanx
            Bill

            Comment

              #7
              Might want to make sure all the water is out also.

              Comment

              Previous template Next
              Working...
              X