Adjusting Taps in Driveway

[Iride]

Just bought a 2015 RZ2 and I am in love. I've been playing with it in the driveway and have noticed that I don't have control of the taps plate with the key turned on. I can put it into manual mode and change the number but the plate doesn't move and the number automatically goes back to 2. Is it not moving because of the autolaunch feature? Or should the plate be moving regardless of the auto launch feature?

Thanks
Kris
Westminster, CO

[JLG]

I think that I heard it won't move with the AVX unless in water or maybe that's just the AVX part of it? Maybe someone else with more knowledge will chime in as I don't have the AVX on my early 15.

[Iride]

spoke with dealership. they say that it is a flash problem that it won't work in the driveway. taps doesn't work like it does on my 2006 20V. You set the number that you want and the computer will move it to the selction once underway. I will see if i can get it to change in the water on saturday. Dealership also says that there is a USB flash fix to get it to move while it's not underway (in the driveway).

[Iride]

Received the flash file from the dealership on Wednesday. I tried to follow the steps for uploading the flash into the computer; however, the directions were vague and I couldn't get the file to upload. We took it out this weekend anyways and couldn't adjust the taps underway regardless of TigeYou being disabled or enabled.

[Iride]

Problem solved. Dealership replaced the throttle "control box". Which, in laymen's terms, means the throttle. They found a pinched wire behind the panel that was connected to the throttle. Works like a charm now.