Tightened up the Starboard side (Alpha Z)Tower bolts this afternoon. Last weekend I noticed coming in from our riding spot I could shake the right side of the tower. It was very loose.
Since we're heading out to the lake again this weekend I don't have time to take it for warranty work so I did it myself.
Not a huge ordeal however for those interested note: the seat backs are attached at the ends by small bolts. For these you'll have to do some monkey work to get at them. After that the Tower seems to only be attached by three 3/4" bolts. There's not much room to work but I got them all tightened.
Hopefully this stays tight for another 100hrs, if not I'm defiantly taking it to a dealer to fix it for good.
Since we're heading out to the lake again this weekend I don't have time to take it for warranty work so I did it myself.
Not a huge ordeal however for those interested note: the seat backs are attached at the ends by small bolts. For these you'll have to do some monkey work to get at them. After that the Tower seems to only be attached by three 3/4" bolts. There's not much room to work but I got them all tightened.
Hopefully this stays tight for another 100hrs, if not I'm defiantly taking it to a dealer to fix it for good.