my boat doesnt have PP and i am looking into it for the next season.. how do you instal it tho? do i tap it into the spedometers in the back of my boat?? then how does it go to the throttle. can someone explain who has instaled them?
-
-
Perfect Pass uses it own paddle wheel that you will install by drilling a 2" hole in the bottom of your boat. The throttle cable will attatch to a servo motor that will in turn be attatched to the EM. You also will need to hook up power, RPM wires. Five wires total and one 2" hole. -
ok that sounds eaisy enuff. i should put the wheel as far back as possible?right infront of the shaft entrance ok? by the way your not lee from sask watersport are you by chance?Comment
-
There are some installation instructions on their website. They are in pdf format. Here is the link.
Perfect Pass installation instructions.Mike Allen, Tigé owner since 1997Comment
-
No I am not the same Lee. What model Tige do you have?Comment
-
i have an 02 20iComment
-
That sounds about the right place. You will need to make sure there is nothing in front of the paddle to mess with the flow of water and on the bottom side make the wheel will clear the trailer bunks.Comment
Comment