NICKYPOO,
In case you get to your install before I make my adjustments, here's what Larry suggested:
To minimize the spray and the pull to the right, loosen the hose clamps at the top of the "tee" and rotate the tee back about 5 more degrees and then re-tighten the hose clamps securely. Let me know how that works.
If the spray persists as an issue, it may be necessary to fix a sheet of plexiglass to the bottom of the swim platform to block the spray.
If the pull to the right persists, it may help to position the Tee towards the left, a little off center. Double check me and see that the Tee is currently dead center with the propeller.
I doubt I'm going to need to install the plexiglass because I'll eventually get a new swim platform and I'd like my next one to be solid (like on the newer models). As for the pull to the right, it's been an issue for a while, but the Fresh Air system just accentuates it a bit.
Hope this helps.
In case you get to your install before I make my adjustments, here's what Larry suggested:
To minimize the spray and the pull to the right, loosen the hose clamps at the top of the "tee" and rotate the tee back about 5 more degrees and then re-tighten the hose clamps securely. Let me know how that works.
If the spray persists as an issue, it may be necessary to fix a sheet of plexiglass to the bottom of the swim platform to block the spray.
If the pull to the right persists, it may help to position the Tee towards the left, a little off center. Double check me and see that the Tee is currently dead center with the propeller.
I doubt I'm going to need to install the plexiglass because I'll eventually get a new swim platform and I'd like my next one to be solid (like on the newer models). As for the pull to the right, it's been an issue for a while, but the Fresh Air system just accentuates it a bit.
Hope this helps.
Comment