Heater hose for 2009 RZ2

[Duncan]

Does anyone know if there is an extendable hose available for the bow walkthrough heater vent on a 2009 RZ2?

[chpthril]

Air hose, right, not the water hose?

The corrugated air hose can be bought by the foot, and shouldn't be too hard to swap out. This may be easier then trying to splice in an extension. Just a thought.

[Duncan]

Air hose, right, not the water hose?

The corrugated air hose can be bought by the foot, and shouldn't be too hard to swap out. This may be easier then trying to splice in an extension. Just a thought.

Air hose, yes. The 2009 RZ2 heater (at least mine) has a grill bolted into the bow walkthru. It does not extend -- but I want it to. Swapping out would be fine but what sort of termination would there be?

[Iwndr]

I put in a Heater craft


http://www.heatercraft.com/category.aspx?categoryID=1

[Duncan]

I put in a Heater craft

That looks exactly like what I am looking for. The website has no link to the product. Do you know the model number for the part?

EDIT: Ok, now that I have learned how to use a web browser ... Ordered!
http://www.heatercraft.com/ProductIn...roductid=H521B

[Duncan]

Hmmm, now I start to doubt myself. The guy at Heatercraft suggested the boat probably already had a pull out hose.

I am fairly sure I tried and there was no pull out. Boat is an hour away.

Anyone with a 2009 RZ know if there is a pullout heater hose with the stock Tige heater?

[dingleberry]

Hmmm, now I start to doubt myself. The guy at Heatercraft suggested the boat probably already had a pull out hose.

I am fairly sure I tried and there was no pull out. Boat is an hour away.

Anyone with a 2009 RZ know if there is a pullout heater hose with the stock Tige heater?

We had ours optioned with the "three vent heater", and our walkway outlet is a pullout hose.

[Duncan]

Yeah, I am dumb. I already have a pull out heater hose.

Hmmm, might keep that quiet and celebrate the "upgrade" in Spring so as to not have to answer "you mean we could have used that hose last on those cold rides back to the slip end of season?"

[Iwndr]

Yeah, I am dumb. I already have a pull out heater hose.

Hmmm, might keep that quiet and celebrate the "upgrade" in Spring so as to not have to answer "you mean we could have used that hose last on those cold rides back to the slip end of season?"

My youngest daughter likes that vent the best, whenever she gets out of the water that is the first place she goes

[joaquin12345]

so on these factory heaters, where exactly is the heater installed. is in the the storage area in front of the captain?? If so would anyone mind adding pics as to where and what the heater looks like and is located. Im wanting to add a heater to my 08 RZ4, but want everything to look as factory/clean as possible

[Iwndr]

so on these factory heaters, where exactly is the heater installed. is in the the storage area in front of the captain?? If so would anyone mind adding pics as to where and what the heater looks like and is located. Im wanting to add a heater to my 08 RZ4, but want everything to look as factory/clean as possible

I can show you a 08 Z1 install,The dealer I bought the boat from in KY. installed it, The Heater hoses are routed down the Starboard side from the engine to the locker in front of the helm, On the Z1 they mounted the Heater itself on the floor of the helm locker. There is one vent under the Helm, and one vent under the observers seat. and I added the pullout vent that comes right out of the walkway side of the helm locker.
The controls were installed right below the Throttle and Ballast controls.

[ospo]

Duncan should let us know his budget. A friend of mine has got a pull out heater hose. He is not using it at the moment and will be ready to sell it. I am not sure about the price. If Duncan wants the hose then I will talk to my friend about it.