Announcement

Collapse
No announcement yet.

2014 z1 warrnings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    2014 z1 warrnings

    We just bought a 2014 z1. this is our second tige and we love it.
    but for some reason when the key is in the aux position we get two warnings
    1. says low battery voltage, showing 1.5 volts on the crank and 12.5 volts on the house. But when the key is in the on position or when we are running the warning goes away and both batteries show 14.5 volts. I changed both batteries to make sure it wasn't that. also we forgot to turn the batteries off and had to jump them, but they charged right up, so no alternator issues.

    2. the second warning says can data loss ignore if in AUX, the funny thing is it only comes on when the key is in the AUX position.

    any thoughts? should i be concerned?

    the boat runs great no problems at all just these two warnings.

    thanks in advance.

    #2
    All that is normal. When ignition is off the CAN loop goes dead. Pretty sure cranking battery info comes from ECM. ECM communicates with screen on the CAN so thats why you only see crank voltage in the on or IGN position

    Comment


      #3
      Thank you! its just a little off putting to see a big warning every time you turn the it off

      Comment

      Working...
      X