yesterday while leaving the dock I noticed that the gauges in the dashboard were not reading data from the engine accurately. I do not have tige touch. Just the analog gauges that have the LCD screens in the bottom. RPM gauge has oil pressure, water temp, and volts. the speedo has a depth, digital speed, and set speed when it's on.
the only gauges that work are the depth and the TAPS gauge. sometimes, randomly, the gauges will get data from the engine and change the readings from zero but freezes instantly and then eventually resets back to zero.
Not sure where to look. I checked all the fuses and connections. To me it seems like the CAN signal is getting lost somewhere but all the connections look sound (engine side and dash side). Any other suggestions or help is greatly appreciated.
FWIW it has the PCM HO303
the only gauges that work are the depth and the TAPS gauge. sometimes, randomly, the gauges will get data from the engine and change the readings from zero but freezes instantly and then eventually resets back to zero.
Not sure where to look. I checked all the fuses and connections. To me it seems like the CAN signal is getting lost somewhere but all the connections look sound (engine side and dash side). Any other suggestions or help is greatly appreciated.
FWIW it has the PCM HO303