Announcement

Collapse
No announcement yet.

MPH

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MPH

    I just got my first Tige, i need to know how to sink the MPH & RPM guages.

    #2
    Congratulations on your new Tige! There is a way to use the TACH and I'm sure someone will post an answer for you. I use a small hand held GPS to sync the Speedo. Works great!
    Mike Allen, Tigé owner since 1997

    Comment


      #3
      To set the speedo press mode "the center button" three times until it says "CALBRT" then use the arrow buttons to adjust speed. You will need a gps or if the perfect pass speed is correct you can just match them up. As for the tach it's set up to read engine rpm and needs no calibration, it should be set from the factory.

      Hope this helps

      P.S. how about some picts of the new boat?
      "I refuse to answer that question on the grounds that I don't know the answer."

      Comment


        #4
        MPH

        thanks, I will try it out today when I leave work here in a minute. I need to get out and check out Lake Mead.

        Comment


          #5
          Not sure where Henderson is but Lake powell is worth the drive.
          "I refuse to answer that question on the grounds that I don't know the answer."

          Comment


            #6
            Maggie:

            If the boat is new, this is something that the dealer should have done for you already. Our dealer here in St. Louis takes care of all of those little details, including showing you how to recalibrate in the future.

            Don't be afraid to ask them.

            Saulo

            Comment

            Working...
            X