I found these two wires up under the port side bow cushion. It looks like a hot and ground wire, but haven't tested it yet. Does anybody know why they are there? Power for an amp?
-
-
hook a test light across the 2 and start flippin switches!Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More -
connections for a ballast pump?Cursed by a fortune cookie: "Your principles mean more to you than any money or success."Comment
-
I am thinking either ballast pumps or a showerComment
-
I have a shower in the back. Ballast makes the most sense. I am going to get the tester on it as soon as the rain stops here. We have gone from the 90's to the 60's
Comment
-
Docking lightsPut your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. THAT'S relativity. Albert EinsteinComment
-
It's power wires for a Fetzer Valve.
It's all ball bearings nowadays. Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And you're gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.http://www.wakeboatworld.com
[]) [] []V[] [])Comment
-
That is not what the wires are for. By looking at the connectors it is for a 12v make-up mirror.Originally posted by spharis
It's power wires for a Fetzer Valve.
It's all ball bearings nowadays. Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And you're gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.Comment
-
Problem solved, the owner manual states its for the Tige Offshore Popcorn Popper!Comment
Comment