Announcement

Collapse
No announcement yet.

No power to bilge pump and radio

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No power to bilge pump and radio

    Lost power to auto side of bilge pump, manual switch works fine...
    same time seemed to loose power to radio, tower speaker amp stuck on, had to disconnect from battery

    Any ideas???

    Thanks

    #2
    Auto side of bilge should be a straight run of wire from pump to battery with an inline fuse close to the battery.. I'd look there first. If these problems are related, you'll probably find something there close by. Maybe the fuse burnt or shorted to a nearby wire..

    Comment


      #3
      tower speaker amp stuck on
      This needs to be verified with a volt meter. You need to verify B+ and B- on the main cables and then see if B+ voltage is or is not present on the turn-on terminal. This will tell you if the is indeed stuck on or in fact, turned on by the head unit. Is there a 2nd amp? If so, does it appear to be off? Since you have the meter out, go ahead and check for voltage on the head unit black, switched red and constent yellow
      Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

      Comment

      Working...
      X