Yet another TAPS problem....

[Alexgarcia3292]

Got power to the switch in the handle!!!! But all it does is run the motor not open the solenoid.... If I jump the solenoid (green wire) just before the relay I can press the switch in the throttle handle to raise and lower the tab. Any idea why power to the solenoid is lost between the relay and switch?

[ChrisSnow]

There's a couple of diodes that drive the solenoid from the relay outputs. Unlikely they are faulty but a cheap fix if it is the case.

Sent from my HTC One_M8 using Tapatalk