Would someone with a Tige Touch 1 that displays both crank and house voltage take a picture of the viper diagnostic page and send to me?
If not familiar press the switches button, then setup, then arrow down to the 2nd to last option and select…then send me a pic of your screen. Thanks for your help and time.
I’ve been searching for a fix, my house voltage displays 18.6V.
Things I’ve done: Uploaded updates from Justin @ Tige, I found a secondary ground wire not connected (fixed), added the pinned wire to the #20 slot on the 20 pin connector when adding the magic button.
jeremiah.malmberg@gmail.com
If not familiar press the switches button, then setup, then arrow down to the 2nd to last option and select…then send me a pic of your screen. Thanks for your help and time.
I’ve been searching for a fix, my house voltage displays 18.6V.
Things I’ve done: Uploaded updates from Justin @ Tige, I found a secondary ground wire not connected (fixed), added the pinned wire to the #20 slot on the 20 pin connector when adding the magic button.
jeremiah.malmberg@gmail.com
Comment