Hi,
Got an '06 24V and I'm a little hung up on the oil pressure switch. The original switch was bad so I replaced it but nothing changed buzzer / alarm / warning sound wise. From what I read there's a buzzer that comes on with low oil pressure. While running the boat on the hose I shorted the pressure switch wire to ground to simulate no oil pressure but there was no buzzer or warning. Digging up under the dash, there's a buzzer zip tied to some wires but it doesn't buzz. Is that the low oil pressure buzzer? What does the oil pressure switch circuit look like? I traced it a little bit and there's a brown/white wire coming from it up to a quick-connect on the top of the engine, however, I lose the wire after that point. Where's it go?
Thanks!
Got an '06 24V and I'm a little hung up on the oil pressure switch. The original switch was bad so I replaced it but nothing changed buzzer / alarm / warning sound wise. From what I read there's a buzzer that comes on with low oil pressure. While running the boat on the hose I shorted the pressure switch wire to ground to simulate no oil pressure but there was no buzzer or warning. Digging up under the dash, there's a buzzer zip tied to some wires but it doesn't buzz. Is that the low oil pressure buzzer? What does the oil pressure switch circuit look like? I traced it a little bit and there's a brown/white wire coming from it up to a quick-connect on the top of the engine, however, I lose the wire after that point. Where's it go?
Thanks!
Comment