Here are a few pics of a Kicker Comp VR12 I installed in an RZ2
Open-faced box made from 3/4 MDF equaling 1.5cf and mounted to the back side of the drivers bulk-head. Brush on Hurculiner.
Box was made with max height and width as to minimize storage eating depth.
All seams sealed
Cardboard pattern used to cut away carpet and for pre-drilling mounting screw holes. I used 2" #8SS screws. The template allowed me to pre-drill the holes in both the box and wall.
Carpet removed. A bead of silicone sealer was placed around the wall before the box was secured in place.
Box set in place
Sub ready to be installed
Final look from the back side
Open-faced box made from 3/4 MDF equaling 1.5cf and mounted to the back side of the drivers bulk-head. Brush on Hurculiner.
Box was made with max height and width as to minimize storage eating depth.
All seams sealed
Cardboard pattern used to cut away carpet and for pre-drilling mounting screw holes. I used 2" #8SS screws. The template allowed me to pre-drill the holes in both the box and wall.
Carpet removed. A bead of silicone sealer was placed around the wall before the box was secured in place.
Box set in place
Sub ready to be installed
Final look from the back side
Comment