Wetsounds WS-420

[buffman]

I will try soon....probably be this weekend though as the boat is at the dealer right now...

[Jeff T]

I will try soon....probably be this weekend though as the boat is at the dealer right now...

I'm sending you a PM.

[buffman]

Here is pics of the custom brackets for the ws-420:




Hope this helps ya!

[dogbert]

That's pretty clever!

[talltigeguy]

Sorry that I have not seen this thread before. To answer one of your initial questions:

I ran my RCA's to my LC1's (a very poor man's WS420, but uses the same cables) from the compartment where the HU and amps are down through the floor next to the vent tube, and then up through the hole that the steering cable goes in. That fit just right with an 8 foot cable. I would be willing to bet that you could do the same.

The shortest distance between two points is a straight line.

[Jeff T]

Sorry that I have not seen this thread before. To answer one of your initial questions:

I ran my RCA's to my LC1's (a very poor man's WS420, but uses the same cables) from the compartment where the HU and amps are down through the floor next to the vent tube, and then up through the hole that the steering cable goes in. That fit just right with an 8 foot cable. I would be willing to bet that you could do the same.

The shortest distance between two points is a straight line.

How did you fish the cables under the floor?

[xpjim1]

I did the same thing Tall did with slightly longer cables. I dropped the cables thru the steering cable hole, went under the glovebox side in thru the bow and caught the cable with a coat hanger . I thought it would be hard but caught them on the first try. pretty easy actually

[talltigeguy]

Was easier than I thought with a coat hanger. Just make sure to remove the little carpeted thing that surrounds the steering cable and it is an easy reach.