New BT From Wet Sounds

[chpthril]

WW-BT RS Blue Tooth Switch

Fits a standard Carling rocker cut out.

Volume, play-back, AUX in
main output to a head unit AUX in or EQ like WS-420 or WS-220 or other
remote turn-on for amps and/or EQ so it can be used in a head-unit delete setup as the main source interface.

[Coop]

So, looks like you can plug this into the Aux input on the WS420 and play/control your Bluetooth devices (i.e., iPhone) through it. In addition to controlling it though this switch, can you also just connect and play/control from the Bluetooth device itself? In other words, sitting in a cove and controlling the music/volume/etc. from the phone on the shore?

If so, this looks like a more robust iteration of the WW-BT-VC. Am I thinking of it right?

Thanks.

[chpthril]

Yes, this unit can plug into the WS-420SQ or the AUX input of a head unit. It will give you volume up/down, track forward/back. On/off/pause. The phone should always give you master control. It will turn on your EQ and amps. However, I would suggest the use of a relay if driving more than two devices. Dont want to overload the turn-on circuit.

This unit also has a hard wire AUX in. So you can go old school and plug your phone's headphone output or other MP3 player.

[Coop]

Yes, this unit can plug into the WS-420SQ or the AUX input of a head unit. It will give you volume up/down, track forward/back. On/off/pause. The phone should always give you master control. It will turn on your EQ and amps. However, I would suggest the use of a relay if driving more than two devices. Dont want to overload the turn-on circuit.

This unit also has a hard wire AUX in. So you can go old school and plug your phone's headphone output or other MP3 player.

Thanks, Mike.

Any idea what the Bluetooth range will be?

[chpthril]

Overall range will be effected by the phone's bluetooth transmitter. I would suspect this unit will use an aptx 4 chip like the BT-VC V2.