On the Wetsounds website it says you can do the ported or sealed enclosure. After I moved up the medallion box and cut out the wall I found the steering cable still limited my space. We decided to build the sealed enclosure to 1.2 cubic ft of airspace as it recommended. My question is has anyone gone this route instead of the ported? Ported was my first choice but wasn't feasible. I'm curious if it will still sound good.
Announcement
Collapse
No announcement yet.
Sealed vs ported box for xxxv2.
Collapse
X
-
I'm not familiar with the xxxv2, however a sealed subwoofer generally "sounds better" than a ported one. You get better frequency response. A port will add an extra 3db of volume (equivalent to doubling the power) but it depends on what frequency your port is tuned to as to whether or not you deem that be sounding as good.
I would never hesitate to run a sealed subwoofer is space is a concern.
-
I have not done a V2 in a sealed and dont plan to. If space would not allow for a ported, I would choose a different woofer. I have heard a V1 in a sealed, and was not overly impressed. The V2 in a ported enclosure with 1000W rms or better, is truly impressive.Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
I took the clips off when I cut out the wall. There is just no slack at all. It sits at an angle behind there blocking most of the room. Oh well. The sealed box sounds pretty good, but I'm sure ported would have been better. It definitely sounds better than sitting in the port locker. Maybe my next boat I can do a ported.
Comment
Comment