REV410 BRACKETS FOR THE ALPHA Z TOWER

[What she said]

Did Tim ever get these done??

[wetsounds1]

Did Tim ever get these done??

Prototype done. First set being made now for the new Z3 demo boat. Once we get them all 100% done we will have them. I will say they are a work of art but expensive to make. Very expensive. So we will have them to offer but will be a custom build per order type deal. I tried every way i could to design and build a bracket that works and looks like it is part of the tower and flows and do it at a good price but there was just no way to do it any cheaper. have not set final pricing just yet.

I will post pics once we get them mounted up

Tim
Wet Sounds

[What she said]

Thanks for the reply Tim! Do you have a ball park price?

[ChrisBarnes05-12-84]

Im gonna leave a spot on my sd 6 amp for a 410 on my new z1 when it gets here. So Tim you need to hurry cuz I need the 410 on my new boat. You have unil roughly memorial weekend to build me one and send it to Devines Radio Shack in Woodward Ok because now that I have a 410 the rev 8's / rev 10's just wont quite cut it by themselves. Sorry to sound so demanding but its a must have for the summer!!!

[What she said]

Chris, if i understand the brackets that Tim is working on they will mount 2 REV410's to the inside of the tower, one on the left, and one on the right, at a 45 degree angle. No need for you REV8's, or REV10's. I hope Tim will show us some pics soon!

[wetsounds1]

dont have a ball park just yet. still working on that.

I will get pics as soon as we get them mounted.

The brackets are designed to mount a pair of REV 410's on the tower. Using the factory top mount locations as well as a clamshell type set up that wraps around the tower to dist weight. They push the speakers out to the sides as well so outside of the speaker is even with the tower giving more headroom.

So Chris, it would be a set up to replace the REV8/REV 10. I think you are wanting to do a center mount single. With the tige tower flip up tow/light assembly. We would have to design a clamp that went around the tower but also spaced the speaker down to allow it to flip. The hang height would be very low and right in the way so i dont think many will want to go that route.

Tim
Wet Sounds

[ChrisBarnes05-12-84]

Well that blows. I have not recieved new boat yet so i'm not exactly sure how the tower is set up until I see it. I had visions of 4 rev 10's and a 410. Now all my hopes and dreams have been dashed without a sliver of hope. I will think about doing 2 410's someday but I will probably just stick to 4 rev 10's for the summer!

[Tanner]

Chris I have a pair of 410's mounted to an Alpha tower here in OK that I designed the mounting system on. I'll try and remember and post pics but I rarely stop in here anymore. They are mounted to the top of the tower though as the bottom has a pair of rev 8's and rev 10's.

[Davidggriffith]

Tim any updates on the mounts

[What she said]

Go here to see there pics https://www.facebook.com/pages/Wet-Sounds/314854733223
I wanted to run 2 Rev410's, but after talking more with the guys at Wetsounds the board racks do not fold all the way in, and that will not let me lower the tower all the way down to clear my garage door. So yesterday a ordered 2 pair of Rev10's, and a SD2 amp.