Announcement

Collapse
No announcement yet.

wetsounds XXX install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wetsounds XXX install

    xxx.jpg

    #2
    xxxx.jpg

    Comment


      #3
      Looks good, just needs a nice shiny grill to cover it
      Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

      Comment


        #4
        Looks good. Im guessing you made an enclosure all the way up to the wall under the helm? Are you going to miss the leg room? Tell us how it performs?? What kind of power are you running to it?

        Comment


          #5
          On my old 22v I had a venter box. I cut out the wall and put the box in the storage area. I was going to do the same thing on the new ve until I saw all the computers were mounted on the wall. I build a box that was as shallow as possible. The box is 8x18x21 so I will loose about 8 inches of leg room but I don't think that is that big of a deal. I'm going to power the XXX with a syn 1. I went with a sealed box this time because it was much smaller. With my calculations the box should be 1.2 cubic ft internal volume. I haven't got around to building the amp rack yet.

          Comment


            #6
            Looks Great!

            Tim
            Wet Sounds

            Comment


              #7
              I look at an rzr to night and the leg room is the same on my boat as it is factory on a rzr.

              Comment

              Working...
              X