1st
"First here are the 4 points of th PM I sent to CP3. I agree that is is 1000% offensive
1)Get your own catalogs. Log onto all the websites to your hearts content and request the 2008 catalogs and you will have PICs to your hearts content.
2) If ya want them from me send me a camera
3) go find you own show,take pics, write up your own damn review,
4) Buy youself a PLayboy
I find it amusing that all the posts I put up trying to learn
more about the Tige 20V were all just thrown in my face by you. Lets see grab handles. Who doesn't have them Tige. Of the majors every body else did.Even $17k boats did. Just so you don't think of it later you forgot the tower. You would be amazed what Moomba says about their tower and Pylon. The trailer is being re-designed because of what happened at my house. Yep I should be sorry for bringing up things and being the first to get that trailer and have all the problems with the boat being too high. My fault for asking about seat seams and finding out Tige did have an issue and my07 should be okay My fault for living and not taking ****. thus Jarhead. Next time before you decide to jump on me get you facts in order and don't jump on me for asking the board about issues of concern. Every concern I had so did others except the gods. What I learned is next time don't editorialize what I find out that could help others. The board is for humor ha ha.
CP3 is unblocked I won't block you cuase it harms me not you and although I am sorry i got pissed about a bad joke I am not sorry for standing my ground. IMO others made bigger issues out of this than I you included."
My response:
If you can point these out to me, I will make a public apology to you in that thread. I have done everything to make you fill welcome in the Tige family and all my post, except an occasional crack, have been very sincere and helpful. I have tried to pass on what I know about Tige, and boats in general, to you and all others on this site, as they do when I post a question. I'm sorry you feel this way.
You seem to have forgotten that I posted the pics of how thick the area is where the pylon is bolted. I pulled mine out because I to, was a little concerned about the pylon.
I remember the very post, it went something like this if I remember "IMO, You dont need grab handles in a Tige, boats dont need to be driven in that manor" I I'm very sorry that you felt I was throwing that back in your face. That was, and still is MY opinion of Powerturns and in no way was a sarcastic comment directed at your question.
I know what they and all the others say, as I just got back from 4 hours at a boat show 1.5 hrs away. I walked around as if I was looking to buy, telling them we liked the Tige and why should I buy yours. They all had negative things to say about the Tige and nothing Positive about thier own brand. It's sad that they have to do this to sell boats. I'm glad that Moomba feels that thier towers are that strong. There boats, IMO, are still an entry level boat, and do not hold a candle to a Tige. Again, this is MY OPINION.
I'm not sure I would say a few split seams are an issue because we dont know how the boats were cared for, with what they were cleaned with, and how many hours the spent out in the sun. I dont think the change in Vinyl was a result of this, but more of a need to keep the models fresh. This is my professional opinion after 17 yrs in the auto business.
I'm sorry you fell I was jumpimg you, I was just defending a friend from what I feel was an unwarranted, unnecessary attack.
Please let me know what facts I have misconstrued? I dont know what you mean here.
Sorry that you feel this way, this really takes away from the forum. Life is too short to be serious 24/7. There is no reason why a question cant be answered with a little humor thrown in. Like I stated earlier, check out Wake World and you will see what I mean. Most of those posters treat each other like dirt.
Michael
"First here are the 4 points of th PM I sent to CP3. I agree that is is 1000% offensive
1)Get your own catalogs. Log onto all the websites to your hearts content and request the 2008 catalogs and you will have PICs to your hearts content.
2) If ya want them from me send me a camera
3) go find you own show,take pics, write up your own damn review,
4) Buy youself a PLayboy
I find it amusing that all the posts I put up trying to learn
more about the Tige 20V were all just thrown in my face by you. Lets see grab handles. Who doesn't have them Tige. Of the majors every body else did.Even $17k boats did. Just so you don't think of it later you forgot the tower. You would be amazed what Moomba says about their tower and Pylon. The trailer is being re-designed because of what happened at my house. Yep I should be sorry for bringing up things and being the first to get that trailer and have all the problems with the boat being too high. My fault for asking about seat seams and finding out Tige did have an issue and my07 should be okay My fault for living and not taking ****. thus Jarhead. Next time before you decide to jump on me get you facts in order and don't jump on me for asking the board about issues of concern. Every concern I had so did others except the gods. What I learned is next time don't editorialize what I find out that could help others. The board is for humor ha ha.
CP3 is unblocked I won't block you cuase it harms me not you and although I am sorry i got pissed about a bad joke I am not sorry for standing my ground. IMO others made bigger issues out of this than I you included."
My response:
If you can point these out to me, I will make a public apology to you in that thread. I have done everything to make you fill welcome in the Tige family and all my post, except an occasional crack, have been very sincere and helpful. I have tried to pass on what I know about Tige, and boats in general, to you and all others on this site, as they do when I post a question. I'm sorry you feel this way.
You seem to have forgotten that I posted the pics of how thick the area is where the pylon is bolted. I pulled mine out because I to, was a little concerned about the pylon.
I remember the very post, it went something like this if I remember "IMO, You dont need grab handles in a Tige, boats dont need to be driven in that manor" I I'm very sorry that you felt I was throwing that back in your face. That was, and still is MY opinion of Powerturns and in no way was a sarcastic comment directed at your question.
I know what they and all the others say, as I just got back from 4 hours at a boat show 1.5 hrs away. I walked around as if I was looking to buy, telling them we liked the Tige and why should I buy yours. They all had negative things to say about the Tige and nothing Positive about thier own brand. It's sad that they have to do this to sell boats. I'm glad that Moomba feels that thier towers are that strong. There boats, IMO, are still an entry level boat, and do not hold a candle to a Tige. Again, this is MY OPINION.
I'm not sure I would say a few split seams are an issue because we dont know how the boats were cared for, with what they were cleaned with, and how many hours the spent out in the sun. I dont think the change in Vinyl was a result of this, but more of a need to keep the models fresh. This is my professional opinion after 17 yrs in the auto business.
I'm sorry you fell I was jumpimg you, I was just defending a friend from what I feel was an unwarranted, unnecessary attack.
Please let me know what facts I have misconstrued? I dont know what you mean here.
Sorry that you feel this way, this really takes away from the forum. Life is too short to be serious 24/7. There is no reason why a question cant be answered with a little humor thrown in. Like I stated earlier, check out Wake World and you will see what I mean. Most of those posters treat each other like dirt.
Michael
Comment