Im lost without the PW thread!!!!

[majestic]

I'll watch anything over LMAObama

Oh is he on? Hope I'm not missing anything important besides part of my paycheck

[konajay]

I'll watch anything over LMAObama

He physically makes me ill every time I see or hear that guy

[bryce2320]

He physically makes me ill every time I see or hear that guy

All blow, no go. Sorry sob

[bryce2320]

Post

[chpthril]

Kicker gear

Are u a believer n wetsounds or kicker, Chp. Or both

yep

[bryce2320]

Multiplier post

[bryce2320]

My boats going to have to set outside covered up for a week or two til I get it done.

[konajay]

Page 14287 post

[bryce2320]

I was thinking about buying those big blue moving blankets and putting them anywhere the cover would rub. Like engine cover, ski locker, front seats. Just about everywhere. I think it'd b fine that way

[bryce2320]

Hey Chp, what kind of glue did u use to glue the mounting blocks for amp rack to the hull? I was thinking 3 blocks would b enough. One on each side and one in towards the middle.

[bryce2320]

I know I asked the other day, but where do I guys buy your impellers from. The place in Stillwater last summer sent me the wrong one

[chpthril]

Mayb I should just fly Chp out

we better pencil it in ASAP. Already have 3 instals on the books. ET's in the shop now, one coming Friday for some towers and a 2nd battery thats was a contact form the boat show, a Centurion coming march 2nd for some in-boats, RGB lEDs, Shadow Caster underwater LEDs and an amp. May go ahead with a pair of REV-10 if his tax return is good. Still waiting to hear when Tigeowners.com member Highrock's Nauty will be done at the dealer. hes getting Rev-8's and a WS-420 and that gear is already in the house. Today, talked with a SeaDoo 230 owner, a Regal owner and a Moomba owner.

[thtrog]

www.skidim.com is good Bryce, type in the brand of my boat to get 10 percent off.

[chpthril]

Hey Chp, what kind of glue did u use to glue the mounting blocks for amp rack to the hull? I was thinking 3 blocks would b enough. One on each side and one in towards the middle.

Contractor grade polyurethane adhesive from your local box home improvement store. Look for the the one that is for wood, etc and not concrete. its in a std caulk tube

Sand a clean the hull, then drill some .24" holes into your block. This gives the glue somewhere to go, making a better bond then just 2 flat surfaces. Apply some pressure and let it cure.

Theres also a couple of types of marine epoxy adhesives that can be found at marine supply places. They also come in a std caulk tube, but can be pricey.

[thtrog]

we better pencil it in ASAP. Already have 3 instals on the books. ET's in the shop now, one coming Friday for some towers and a 2nd battery thats was a contact form the boat show, a Centurion coming march 2nd for some in-boats, RGB lEDs, Shadow Caster underwater LEDs and an amp. May go ahead with a pair of REV-10 if his tax return is good. Still waiting to hear when Tigeowners.com member Highrock's Nauty will be done at the dealer. hes getting Rev-8's and a WS-420 and that gear is already in the house. Today, talked with a SeaDoo 230 owner, a Regal owner and a Moomba owner.

WOW, that's a full plate!