Im lost without the PW thread!!!!

[Iwndr]

we may need bigger and clearer pictures to be sure

That was directed at ET's group pic

[houstonshark]

I probably got another 2 - 3 lower TAPS positions out of it which helped a ton! Before the mod I really couldn't use TAPS above 2, maybe 3 depending on weight.

[thtrog]

enough said...

HA!

[Iwndr]

houston - what is the thing circled in red?

[ATTACH]31076[/ATTACH]

Anode????

[dingleberry]

Anode????

That's what I was thinking it might be. But thought I'd ask someone who actually knows. Which obviously isn't the Dr

[thtrog]

That was directed at ET's group pic

YES

[thtrog]

I saw it, but didn't ask.

[houstonshark]

so those two holes you drilled are crooked, You did not take it off the transom and redrill any holes there did you?
That should be a easy fix on that mount

I drilled it without taking the plate off. My error was that I used a unibit to drill the holes and I accidentally drilled the right hole a little too big for the bolt. No matter how much I tighten it, the water pressure pushes the bolt up higher in the hole I drilled. I either need to put a sleeve in there or just open the left hole up a little more. The water is always pushing up so it will never slip down.

[houstonshark]

houston - what is the thing circled in red?

Yep. It's a zinc anode.

[Iwndr]

I drilled it without taking the plate off. My error was that I used a unibit to drill the holes and I accidentally drilled the right hole a little too big for the bolt. No matter how much I tighten it, the water pressure pushes the bolt up higher in the hole I drilled. I either need to put a sleeve in there or just open the left hole up a little more. The water is always pushing up so it will never slip down.

Change the screw out for a bigger bolt in the one if they are centered

[houstonshark]

What's funny is that we only had about 3 days all summer where the water was salty, at least where I could tell. The anode stayed looking new until those 3 days and then started to corrode. After those 3 days, it has pretty much stayed looking the same.

[Timmy!]

Tire rotation post.

[dingleberry]

Yep. It's a zinc anode.

Gotcha. Thanks.

[Iwndr]

That's what I was thinking it might be. But thought I'd ask someone who actually knows. Which obviously isn't the Dr

That Hurts

[Iwndr]

I think I'll get new tires for the truck tomorrow