If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is that the carbon fiber one that WABoating bought? I rode that 2 weeks ago, he and I compared his thruster to my sweet spot pro with 4 fins. He thought my the ssp was squirley and I thought the Ronix was squirley. He had a house guest who couldn't stay up on the ssp but who could ride the Ronix easily. I also weigh about 20-30 lbs more than WABoating so that might have a little to do with the different feel.
Not sure what WA owns. The board was easy to ride but it was like riding a sheet of plywood not that I have done such a thing
Glad to hear. i hate having sick little ones - I think you've had to deal with enough of that.
Did you get the boat back?
No. Since I wasn't going to use it this weekend I told him he could push it off if he needed to. He was going to start on it yesterday. I'm thinking I will bring it home for a good cleaning and install new cabin speakers, and thru-hulls for the front ballast.
No. Since I wasn't going to use it this weekend I told him he could push it off if he needed to. He was going to start on it yesterday. I'm thinking I will bring it home for a good cleaning and install new cabin speakers, and thru-hulls for the front ballast.
I would "T" off the fill thru hulls if there is space. If you put the opposite side bow fill pump, should work fine.
I would "T" off the fill thru hulls if there is space. If you put the opposite side bow fill pump, should work fine.
drain/vent - drill baby drill.
That's the plan. I have plenty of room. I ordered The short Rule 405fc for the rear fills and I will put the existing ones on the rear drains and take the t-800's on the rear drains and use for the front fill pumps.
Comment