off to scouts
Announcement
Collapse
No announcement yet.
Im lost without the PW thread!!!!
Collapse
This topic is closed.
X
X
-
Originally posted by skippabcool View PostEverything works great but one thing. The light that is supposed to light up when you have the switch engaged does not work. Any ideas?
Pull the red wires marked with the green arrows and see what happens.Attached FilesLast edited by chpthril; 03-14-2012, 01:01 AM.Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
Originally posted by chpthril View PostYes. B+ that runs the pumps also it the B+ that lights the light. It goes to the middle terminal #2, The ground for the lights is the lone terminal at the top, #7. In short, you only need a ground to the switch for the light. The lights B+ comes from the same source that goes through the switch to power the pump.
Pull the red wires marked with the green arrows and see what happens.
That wire I tapped into an existing switch for the boat lights (I used red 14 gauge because that was what I had). The black 14 gauge next to it is the ground.
Terminal 2 is the power from the breaker.
Terminal 1 above 2 is the drain pump wire.
Terminal 3 below 2 is the fill pump.
8 7
1 4(no terminal)
2 5(no terminal)
3 6Attached Files
Comment
Comment